back to home page

Biwater Treatment Ltd
Simplon Revolving Sprinkler

 
Most popular spares:

Maxi Rotor
TNO Rotor
Rotating Bar Interceptor
Simplon
Simplette
FSM Screen
Surface Aerator
TMA Aerator
Grit Rake
Flight Scrapers







The primary object in designing the Simplon Revolving Sprinkler was to produce a revolving sprinkler would operate for many years without any attention other than occasional lubrication and the normal cleaning of the distribution arms. A modern revolving sprinkler must be virtually frictionless and capable of revolving efficiently under a head of 2in or 3in above the centre of the distributing arms. Distribution of the settled sewage over the filter bed must be even.

There are several sections that make up the Simplon Revolving Sprinkler these include:

Stationary PillarSimplon Revolving Sprinkler

Revolving Pillar

Pillar Cap and Main Ball Bearings

Check Rings

Ball Bearing Guide Rollers

Distributing Arms

End Caps

If you require any more information please contact the spares department:

Tel: +44(0)1706 367555
Fax: +44(0)1706 365598
Email: spares@biwater.com

 
 
 



For Spare ordering/ enquiries, there are four methods of contact available:

Email: spares@biwater.com
Tel: Spares Department
+44 (0)1706 367555
Fax: FAO Spares Dept
+44 (0)1706 365598
Post: Spares Department
Biwater Treatment Ltd
Biwater Place
Gregge Street
Heywood
Lancashire
OL10 2DX

UK





Biwater Treatment Ltd Biwater Place, Gregge St, Heywood, Lancashire, OL10 2DX
T:+44(01706) 367555 F: +44(01706) 365598 e:info@biwater.com
©Copyright Biwater Treatment Ltd